Compact overhead monorail shotblast machines for infeed procedure

Quality with the smallest footprint

With its compressed design requiring very little floor space, the three versions of the CAPSOR® eco are very space-saving and can be set up without foundation.

Operation as well as maintenance are easy.

The CAPSOR® eco is an efficient solution for

  • Blasting structural parts of steel in batch processing
  • Blasting structural parts of aluminium in batch processing when using a shock pressure resistant filter or wet filter


The workpieces are attached by the operator outside of the machine to a customer-specific transport trailer. Once they are introduced into the blasting cabinet and the cabinet door has been closed manually, they are blasted optimally on all sides in front of the shotblast wheels by means of the simultaneous rotation and oscillation. The overhead monorail system runs in a Y-shape in front of the blasting cabinet and is equipped with an automatic switch in front of the system, so that two transport trailers can be used for two-way feeding.

The shotblast wheels used are the “R” turbines which are easy to maintain. The blasting abrasive is reclaimed to the bucket elevator via a funnel and a screw conveyor. Smaller particles are extracted from the blasting abrasive in the optimised, one-level separator by means of an airstream, and fed to the filter system integrated at the rear.

To empty the collecting container resting on rollers below the filter funnel, it is detached and pulled out. The switchgear is equipped with a programmable logic controller.


The following options are available for the CAPSOR® eco:

Pneumatic actuation of cabinet door

Frequency-controlled speed adjustment

Exhaust pipe

Air recirculation via secondary filter

Wet filter or shock pressure resistant filter for blasting aluminium workpieces

Abrasive refill hopper

Here you will find the brochure

Technical Data


Max. dimension of hanger  

  Dimension of

blasting chamber

Height of

bucket elevator

Height of


Total length 

Width of


CAPSOR® 8 ∅800 1200 1200 1250  1500  3900 650 4000  2700
CAPSOR® 10 ∅1000 1600 1400 1450 1900 4500 750 4500  3100
CAPSOR® 15 ∅1500 1600 1900 1950 1900 4500 750 5100 3600


Your contact

Frank Jakobs-Thiedecke

Frank Jakobs-Thiedecke

Sales Operator
Flaggen DE.png Flaggen GB.png
Phone +49 5258 508 333

Jörn Migge

Jörn Migge

Flaggen DE.png Flaggen GB.png
Phone +49 5258 508 336

Christian Tölle

Christian Tölle

Sales Operator
Flaggen DE.png Flaggen GB.png
Phone +49 5258 508 334

Heinz Neise

Heinz Neise

Sales Manager
Flaggen DE.png Flaggen GB.png
Phone +49 5258 508 332


+49 5258 508 0



Social Media